Maxiflash Bluetooth Driverfasrdial

Posted on by



  • Download

If your download is not starting, click here.

Thank you for downloading MaxiFlash Bluetooth from our software library

This download is provided to you free of charge. The download is provided as is, with no modifications or changes made on our side. The version of MaxiFlash Bluetooth you are about to download is 2.02.0. Each download we provide is subject to periodical scanning, but we strongly recommend you to check the package for viruses on your side before running the installation.

The MaxiFlash is designed to be a full J2534 reprogramming tool for a specific car manufacturer. It features ergonomic design, rugged case, faster performance and low cost. Ford validated for module programming (FMP) Reprograms most Ford ECM's using the FMP reprogramming application. Performs PATS Security Key functions. The MaxiSys will pick up pretty much anything that has Bluetooth enabled such as a printer or a mobile phone so these will also be displayed. If no Bluetooth devices are displayed check the signal strength of the VCI, and make sure that no red lights are flashing on your box. Also check that there is nothing in the way blocking the signal. A way to delete MaxiFlash Bluetooth from your PC with the help of Advanced Uninstaller PRO MaxiFlash Bluetooth is a program marketed by Autel Intelligent Tech Inc. Frequently, users decide to uninstall this application. Sometimes this is efortful because performing this by hand takes some skill regarding Windows internal functioning. Maxflash built the 32GB Action SDHC Card Class 10 to provide reliable, high-speed storage for your favorite helmet camera. This card flexes lightning-fast read and write speeds so you can record in HD without hiccups, the card operates in a huge temperature range, and it's designed to keep ticking after you take a big hit.

MaxiFlash Bluetooth antivirus report

This download is virus-free.This file was last analysed by Free Download Manager Lib 128 days ago.

KASPERSKY

NOD32

AVG

Often downloaded with

  • Bluetooth RadarBluetooth Radar is an opensource, free application for Windows which uses your...DOWNLOAD
  • Bluetooth Stack SwitcherBluetooth Stack Switcher is an application designed to help you switch between...DOWNLOAD
  • Bluetooth OBEX File TransferBluetooth OBEX File Transfer can manage files of your OBEX device that support...DOWNLOAD
  • Bluetooth Software Update ToolWith Bluetooth Software Update Tool you can download the latest updates to your...DOWNLOAD
  • Bluetooth Mouse - KeyboardThis service represents a freeware program that will allow your phone device to...DOWNLOAD

Autel MaxiFlash Pro J2534 is a reliable and flexible ECU Programming tool. With the OEM software, this premier tool is capable of providing dealer-level programming capabilities for all makes, all models at an affordable price.

Autel MaxiFlash Pro alone supports Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics (Need to Get Software Yourself). MaxiFlash also works together with Autel MaxiSys 908 / MaxiSys 908P to support more cars as well.

Following is the software installation and connection instruction provided.

Tool needed:

–PC or laptops with USB ports

–Software CD

–MaxiFlash pro J2534 Pass-Thru interface

–USB cable

Install Device Driver

In order to make the MaxiFlash Pro operate correctly with the re-flashing and diagnostic applications in the target PC, you will first install the MaxiFlash Pro J2534 Pass-thru device driver onto PC that will control the device.

1) Insert the software driver CD to your computer. The driver installation wizard will load automatically.

2) Click on “Next” to welcome to the program main page

3) Select “Next” on the installation location and installation name. It is recommended not to change the default settings. Otherwise the computer may have a hard time recognizing the driver

Maxiflash

4) Click Install and the driver program will be installed on your PC

Note: During this time, a MS-DOS style window will pop out and may remain on your screen for a short while. It is normal, do not attempt close the MS-DOS style program as it will prevent the driver from being installed completely. It will be closed automatically when the driver is successfully installed.

Install MaxiFlash Pro software

5) Connect the MaxiFlash Pro programming tool with PC using USB cable. A “Found New Hardware Wizard” window will display

6) Select “Install the software automatically (Recommended)”, click on “Next” and windows will search for the driver software automatically.

7) Select “MaxiFlash Pro” program and click on “Install”

Maxiflash Elite J2534 Driver

8) When the MaxiFlash pro device driver is successfully installed, you will be able to see the “MaxiFlash Pro” entry in the Device Manager under “Maixi Pass Thru Serial”

NOTE:

If the driver installation is not complete or unsuccessful, or the PC still can’t recognize the device, an Error or Question mark will display beside the entry icon. Please try installing the driver program again by clicking the entry, then select start auto searching for the software, or manually locate the specific file that contains the driver program.

Maxiflash

Configure Network

The MaxiFlash Pro device program also provides users with an easy and convenient application interface for operating network configurations to ensure proper communication between the Pass-Thru device and the PC.

9) Ethernet Connection. Using wired network between the Pass-Thru device and the PC, users can choose either way of connection described as below:

Connecting to a PC Directly

  1. Connect the PC to the Pass-Thru device with the supplied Ethernet cable.
  2. Open “My Network Places” Properties.
  3. In the Properties window, under the LAN or High-Speed Internet heading, right click on the “Local Area Connection” and select “Properties”.
  4. Now a new window should pop up, titled “Local Area Connection Properties”. Here you need to select the Internet Protocol (TCP/IP) option, and then click on the “Properties” button.

Again a new window titled “Internet Protocol (TCP/IP) Properties” will pop up. In this window, you need to select “Use the following IP Address” radio button, and set the specific IP address (take the value shown in picture below example), then click on “OK”.

NOTE: For specific IP address information please contact your network administrator.

After all the above properties settings have been properly set, users can continue on completing the network configuring procedure, please refer to the detailed operation guidance in

MaxiFlash Configuration – Wired Network.

Connecting to an Existing LAN

1. Connect the Pass-Thru device to a local network with the supplied Ethernet Cable.

2. On most LANs,Autel MaxiFlash Pro can obtain its IP address automatically using DHCP.

MaxiFlash Configuration – Wired Network

Autel Maxiflash Pro Driver Install

1) Connect the Pass-Thru device to the PC or an existing LAN with the supplied Ethernet cable.

2) Power up the device by the external power supply; verify the green Power status light on the front panel is on.

3) Verify the Ethernet status light is on.

4) Click on “All Programs” from Windows Start Menu, find the “MaxiFlash Pro” entry under “Autel”, click on “MaxiFlashCFG”, and wait for the program interface to pop up.

5) Select the “Settings” tab to set up the network configuration.

6) Select “DHCP”, if you are connecting to the local area network, the MaxiFlash Pro will obtain the IP address automatically. Select “Manual”, if you are connecting to the PC directly for the first time, and then set the IP address on your own.

7) Click on the “Apply” button to save the network configuration

Related posts: